Soldering Your Engagement Ring and Wedding Band Together

Soldering an engagement ring and wedding band joins them into one piece with a small amount of solder, usually at the base where the two bands touch. It stops the rings shifting and rubbing against each other. Jewelers that publish their prices charged about $59 to $120 for two gold rings and $102 to $140 for platinum on November 11, 2026. It can be undone, but resizing gets harder, and it can affect your warranty.
We sell engagement rings and wedding bands, and customers ask us whether they should solder their set. So we read what gemologists and bench suppliers say about heat near diamonds, the warranty terms of large jewelers, and jewelers’ own price lists, rather than repeating the usual pros and cons. Some common claims didn’t hold up, including that platinum is harder than gold and that soldering can never be reversed.
Pictured: an oval solitaire setting with a slim pavé band in white gold, worn as a set. Image created from the designs.
What does soldering rings together mean?
Solder is a metal alloy that melts at a lower temperature than the metal it joins, so a jeweler can melt the solder without melting the rings, as the International Gem Society explains. For a bridal set, the jeweler cleans both rings, checks the stones, lines the rings up the way you wear them and joins them where the shanks touch, usually at the bottom. The rings are then cleaned and polished, and the stones checked again.
- Gold rings are joined with gold solder, often of the same karat. US law counts the solder when a piece is tested for its karat, which is one reason jewelers keep it at the ring’s own karat.
- Platinum rings can be welded, which fuses the metal itself, or soldered. Bench supplier Stuller recommends a lower-temperature white gold solder or a laser when stones are already set.
- Laser welding puts the heat into a tiny spot, so some jewelers use it to join rings without heating the whole piece.
The work itself takes minutes to an hour at the bench. Jewelers commonly quote anywhere from a couple of days to two weeks before you get the rings back, so don’t leave it until the week of a trip.
You’ll also see it spelled “sautered”. That’s a misspelling that comes from the American pronunciation of solder, which drops the l, as Wiktionary notes.
Why people solder their rings
The reasons jewelers and insurers give are consistent, though they come from experience rather than studies:
- The engagement ring stops spinning or tilting against the band, especially a tall setting on a ring sized to get over a large knuckle.
- The two rings stop rubbing and pinching each other, and pavé or channel rows stay lined up.
- You have one piece to take off, clean and keep track of.
A diamond scratches any metal it rubs against, so diamonds on one ring can mark the other ring’s metal. We found no study measuring how much, though.

An oval solitaire and a slim pavé band worn together. Image created from the designs.
The downsides of soldering
- You can’t wear either ring alone. That matters for travel, some jobs and swelling in pregnancy.
- Resizing gets harder. The jeweler usually separates the rings, sizes each one and joins them again, so you pay for more than one job.
- The order is fixed. Adding an anniversary band later, or changing which ring sits closer to your hand, means another visit.
- Fit matters. A straight band against a low or curved setting leaves a gap, and two bands of different thickness may not sit flat together.
- White gold usually needs re-plating. Polishing the joint removes the bright rhodium finish, so the pair is re-plated. One jeweler lists that at $70 for two soldered rings.
- The joint can wear. Over the years shanks thin, and a thin joint at the base can crack and need new metal.
How much does it cost to solder rings together?
Large chains such as Kay, Zales and Jared don’t publish a price for it, so ask in store. These jewelers do publish theirs:
| Jeweler | Two rings | Notes |
|---|---|---|
| Siebke Hoyt Jewelers, Iowa | $59 in 14K gold, $69 in 14K white gold, $102 in platinum | Three rings $89 to $153 |
| My Jewelry Repair, mail-in | $74 | Two or three rings |
| An online moissanite seller | $120 in gold, $140 in platinum | Its own customers only |
Prices read on each jeweler’s own price list, November 11, 2026. Sources: Siebke Hoyt and My Jewelry Repair.
Platinum costs more because it needs much more heat or a laser. For white gold, check whether re-plating is included. Single-figure prices on cost-guide sites and some jewelers’ blogs aren’t the price of their own service, so ask the jeweler who will do the work.

What jewelers that publish prices charged, November 11, 2026.
Does soldering damage diamonds?
Usually not, but heat is the reason to choose a careful jeweler. GIA’s research on gemstone durability says diamond stands up to heat well, which is why diamond accents are often set before soldering. It also warns that a dirty diamond can cloud under the torch, though only on the surface, which can be polished off, and that uneven heating can make one cleave.
The temperatures are close enough to matter. One maker’s 14K repair solders flow at about 718–799°C, and GIA gives the range at which diamond can burn in air as about 700–900°C. That overlap is why jewelers clean and protect the stones before the torch comes near them.

How hot the bench gets, against what a diamond can take.
- Some colored stones are riskier. GIA names emerald, tanzanite and tsavorite as at risk when soldering happens near them. Opal and pearl are damaged by heat, and oiled or dyed stones should avoid it.
- Treated colored diamonds can change color. GIA advises removing irradiated diamonds before repair work.
- Lab-grown diamonds are diamond, so the same rules apply. One GIA study found some untreated CVD lab-grown stones lost color when heated to 450°C, and the color came back after more than 30 minutes under daylight-type light. JCK reported that this is uncommon and temporary.
Can soldered rings be separated or resized?
Yes. A jeweler cuts or heats through the joint, then files and polishes each ring. A little metal is lost and a faint line may remain, but the rings can be worn apart again. Calling soldering “permanent” only means it’s meant to stay.
Resizing a soldered pair usually means separating it, sizing each ring and joining them again. At one mail-in shop that’s a $79 resize plus a $74 solder. A ring within about one size can often be adjusted, while a bigger change is more work. Our ring resizing guide covers resizing prices and turnaround in detail. Our ring size guide explains how to measure before you join anything.
Soldering, warranties and insurance
Ask the seller of your rings before anyone else touches them. Brilliant Earth’s policy page says repair or service by a jeweler it hasn’t authorized voids its warranty, and Kay’s and Jared’s service plans exclude unauthorized repairs or alterations. Neither plan page mentions soldering by name, but a soldered set is an alteration.
Soldering isn’t one of the services we list at Whitemoon. Whitemoon Care doesn’t cover work by an outside jeweler or damage that follows from it, and our terms end the lifetime promise on retipping and rhodium plating for a piece altered elsewhere. If you’re thinking of soldering a Whitemoon set, contact us first.
We found no insurer that says soldering changes your cover, but the piece itself changes. Tell your insurer, and ask for the appraisal to describe the set as it is now.
Do rings worn together wear each other down?
Some, but nobody seems to have measured it. The best data is one chemist who weighed his own 18K wedding ring every week for a year: it lost 6.15 milligrams, mostly on a beach holiday, with gardening and skiing next. A lab test commissioned by the Platinum Guild found gold alloys lost weight under abrasion while platinum didn’t, and that harder alloys didn’t always lose less, JCK reported, noting who paid for it.
That second point surprises people: platinum isn’t harder than gold. Annealed 14K yellow gold measures about 190 on the Vickers scale, while common platinum alloys measure about 80 to 135, according to Platinum Guild figures. Platinum scratches easily but tends to push metal aside rather than lose it. Our gold karat guide compares 10K, 14K and 18K.

Platinum isn’t harder than gold by the Vickers test.
Alternatives to soldering
- A curved or contour band. It nests around the engagement ring so there’s no gap, without joining them. We list 90 curved, contour and chevron band designs out of about 400 wedding band designs, and a typical one costs about $690 in 10K gold or about $240 in Silvadium, our tarnish-resistant sterling silver. See curved wedding bands and chevron wedding bands.
- Sizing beads. Two small metal beads inside the shank steady a ring that spins. One mail-in shop lists them at $149.
- Ring guards or clips. Cheap and reversible, though some people find them uncomfortable or untidy.
- A thin spacer band between the two rings, or a ring jacket shaped around a solitaire.
- Different hands or fingers. No rule says both rings belong on the same finger, as our guide to which finger a wedding ring goes on explains.
If the real problem is a ring that spins, soldering it to a band won’t fix a loose fit: the pair can still turn together. Resizing or sizing beads address that.
What to ask before you solder
A good jeweler will answer these without hesitation, and the answers tell you a lot about how carefully the work will be done.
- Which solder or method? For gold, ask for solder of the same karat as your rings. For platinum, ask whether they weld, use a laser, or use white gold solder because stones are set.
- Will the stones be checked first? Loose stones should be tightened before any heat, and the stones cleaned so they don’t cloud.
- Will any stones come out? Emeralds, tanzanite, opals, pearls, treated stones and irradiated colored diamonds should be removed or kept well away from the flame.
- Where will the joint sit? Most jewelers join only the bottom of the bands. That keeps the work simple but lets the tops spread apart if one catches.
- Is re-plating included? White gold usually needs it after the joint is polished.
- Can I have it in writing? A receipt describing the work helps with your insurer and with any later repair.
Should you solder your engagement ring and wedding band?
In our opinion, it makes most sense once your size has been stable for a while and you know you’ll wear both rings together every day. Most couples wait until after the wedding so the band can be exchanged on its own. Our wedding band guide explains the styles to choose from. If you’re still choosing a band, pick one that sits flush with your engagement ring first; our guide to stacking a band with a solitaire shows how different shapes fit.
Most Whitemoon rings are made to order in about 10–15 days and ship free with insurance both ways, with 30-day returns on unworn pieces and one free resize within 60 days of delivery.
Ring soldering questions
How much is it to solder your rings together?
Jewelers that publish prices charged about $59 to $120 for two gold rings and $102 to $140 for platinum on November 11, 2026. White gold may need re-plating on top.
What are the pros and cons of soldering rings together?
Pros: the rings stop shifting, spinning against each other and rubbing, and you have one piece to manage. Cons: you can’t wear them apart, resizing costs more, white gold needs re-plating, and it can affect a seller’s warranty.
What are the disadvantages of soldering?
Mainly flexibility. You can’t wear one ring alone, any resize means separating and rejoining, and a jeweler’s torch near stones calls for care, especially with emeralds, tanzanite, opals, pearls and treated stones.
Can soldered rings be unsoldered?
Yes. A jeweler cuts or heats through the joint and refinishes each ring, sometimes leaving a faint line.
How long does it take to solder rings together?
The bench work takes minutes to an hour, but jewelers commonly need from a couple of days to two weeks to return the rings.
Should I solder my rings before or after the wedding?
Most couples wait until after, so the band can be placed on the finger during the ceremony and the fit settled first.
What are alternatives to soldering rings together?
A curved or contour band that nests, sizing beads, ring guards or clips, a spacer band, or wearing the rings on different fingers.
Is it “sautered” or soldered?
Soldered. “Sautered” is a misspelling that comes from the American pronunciation, which drops the l.
