Pavé wedding bands pack small laboratory-grown diamonds edge to edge, each gripped by a few raised grains of metal. Most designs set stones across the top only, as half eternity bands; some run them the whole way round.
Choose the coverage, a straight or curved profile, and the metal. Our guide to wedding band types shows how each one sits beside a ring. Every design is offered in platinum, and nearly all in gold and silver too.
Lab-Grown Diamond Vintage Wedding Bands
Baguette Lab-Grown Diamond Wedding Bands
Lab-Grown Diamond Curved Wedding Bands
Lab-Grown Diamond Three Stone Wedding Bands
Nature Inspired Wedding Bands
Engraved Wedding Bands
Lab-Grown Diamond Infinity Wedding Bands
Lab-Grown Diamond Eternity Wedding Bands
Twisted Wedding Bands
Channel Set Wedding Bands
Bezel Set Wedding Bands
Chevron Wedding Bands
Lab-Grown Diamond Pave Eternity Bands
Yellow Gold Lab-Grown Diamond Pave Wedding Bands
Gold Lab-Grown Diamond Pave Wedding Bands
White Gold Lab-Grown Diamond Pave Wedding Bands
Platinum Lab-Grown Diamond Pave Wedding Bands
Lab-Grown Diamond Pave Men's Wedding Bands
Lab-Grown Diamond Milgrain Pave Wedding BandsOn a half eternity pavé band, the lab-grown diamonds stop partway around and the palm side stays plain metal. The bare metal underneath allows resizing and is kinder to the fingers on either side. A full eternity band sparkles from every side, but it can't be resized: changing the size means making a new band.
Roughly half of these designs curve or notch at the middle to hug an engagement ring's center, so the two touch without a gap. A straight pavé band suits an engagement ring with a high head, or works alone. If your engagement ring also has a pavé band, matching the stone size and metal makes the pair read as one set.
Add up every lab-grown diamond in a band and you get its carat figure. Most bands are sold at 0.25, 0.35 and 0.5 carat as a total weight; a few designs reach 0.75 or more. Beyond the classic single row you'll find chevron, twisted, vintage milgrain and channel-set details, plus a few designs made as men's wedding bands.
Platinum's density keeps tiny stones locked in, which helps on a ring that takes daily knocks. Gold choices are yellow, white or rose at 10K, 14K or 18K. For a lower price, Silvadium, a tarnish-resistant sterling silver, gives up some hardness. The entry price is under $200, and the bulk of the range costs about $550 to $750.
Each pavé band is made to your size in 10–15 days and comes to you with free insured shipping, which also covers a return. You can return it unworn within 30 days. One resize is free in the first 60 days after delivery; for a full eternity band, that size change means remaking the band.
A pavé wedding band is a ring covered in small stones packed tightly, each fixed by minute beads of metal, so almost no metal shows between them. The term borrows the French word for a paved road. On these bands the stones are lab-grown diamonds, set halfway around on most designs and all the way around on full eternity styles.
Yes, usually more than a plain metal band of the same width. You pay for the lab-grown diamonds and for the skilled work of setting many small stones evenly. Lab-grown diamonds keep that cost down compared with mined stones, and a half eternity pavé band costs less than a full eternity one because it holds fewer stones.