Skip to content

Solitaire earrings keep things simple: a single lab-grown diamond on each ear, with no accent stones around it. Studs make up most of this collection, joined by a few small huggie hoops that each hold one stone.

Your three choices are the cut, the metal and the total weight. Round leads for its sparkle, and emerald, pear, princess and a few rarer cuts change the outline while keeping the look clean.

Prongs, a bezel or a huggie hoop

Prong studs leave most of the lab-grown diamond visible, so light reaches it from every side; basket, martini and crown heads are versions of this. A bezel stud rings the stone with a slim collar of metal, giving a smooth outline and guarding its edge. On a huggie, the stone rides a little hoop hugging the lobe, so it stays put, which also works for a second or third piercing.

What the carat and grade options mean

A pair's carat figure covers both lab-grown diamonds together, so a 1 carat pair means roughly half a carat per ear. Half-carat and 1 carat pairs are offered on most designs, and about half the range climbs from 2 up to 10 carats total. For grades, most pairs offer E–F or F–G color alongside VVS–VS or VS–SI clarity, and some list single grades as fine as D color. Prices open under $150 for the smallest pairs; the usual spend is about $350 to $450.

Choosing the metal and the backs

Each pair is made in rose, white or yellow gold at 10K, 14K or 18K. Nearly all designs are also available in Silvadium, a tarnish-resistant sterling silver, and many in platinum. A white metal keeps a colorless stone crisp, while yellow or rose gold warms it. Some studs use screw backs that thread onto the post, a good idea for bigger stones you would hate to lose.

Ordering from Whitemoon

Each pair is made for you in 10–15 days and comes with free insured shipping both ways. If they are not right, return them unworn with the certificate within 30 days.

FAQ

Questions about Lab-Grown Diamond Solitaire Earrings

What are diamond solitaire earrings?

They are earrings that hold one stone per ear, with no smaller accents around it. In this Whitemoon collection, each stone is a lab-grown diamond, usually held as a stud by prongs or a bezel, while a few designs set it on a small huggie hoop. With nothing else in the setting, the cut and size of the stone carry the whole look.

What size diamond solitaire earrings should I get?

Most people choose 0.5 to 1 carat total weight for daily wear. A 1 carat pair has about half a carat per ear, close to 5 mm across in a round cut, easy to see but light on the lobe. For a pair people notice across a room, look at 2 carats total weight and above, and pick screw backs once the stones get large.

Call now