A 1 carat pear shaped lab-grown diamond ring in a solitaire setting puts one teardrop stone on a slim band and lets its outline do the talking. The 1-carat lab-grown center comes set, with its cost in the price. You still decide on the band, plain or lined with pave, and on platinum or a gold color: white, yellow or rose.
A pear is usually worn with its tip pointing to the nail, a direction that lengthens the hand visually. That sharp end chips more easily than the rounded top, which is why pears normally get a V-shaped prong capping it. A 1-carat pear also measures longer than a 1-carat round, giving you more visible length for the same weight.
Half of these rings leave the shank bare, so the eye goes straight to the pear. The rest add pave: one runs small lab-grown diamonds along a straight band, and another lifts the pear on cathedral arches with pave on the shoulders. A plain band is the easier pick if you plan to stack a wedding band beside it later.
Band width is your call too: 2.2 mm on all of them, with 1.8, 2 or 2.5 mm on some. A thinner band makes the pear look bigger, while a wider one shrugs off daily knocks better. Gold comes in 10K, 14K or 18K: 14K balances color and hardness, and 18K has a richer tone but scratches sooner. Platinum costs more and stays white without plating.
Rings with the 1-carat center start under $1,000, and most sit around $950 to $1,050 in their least expensive metal. A full carat lands at this budget because grown stones sell well under the price of mined ones this size.
Whitemoon sets your pear and finishes the ring within 10–15 days, then sends it with free insured shipping, returns included. The center comes with its IGI or GIA grading report. Send it back unworn within 30 days if it isn't right, or ask for one free resize in the first 60 days after delivery (more than a size up or down is a remake).